Steel Detailing | Precast Detailing | Estimation

Author: admin

  • Show pdf lines as thin lines

    On pdf drgs if you press CNTRL+5 the thick lines can be seen as thin

  • Free your estimator for more value added Tasks

    $3 per ton Material Take Off – Modeled with Tekla

     

    Free your Estimator to do more value added tasks

    (Good for Estimation Only – Cannot Order Steel from this model)

    In No case we will raise RFIs. 

    We hold 6 Tekla Lic in India and 2 in Australia.

    Please watch our video

    Accuracy and speed is what modern tools bring for estimation.

    We are offering limited time estimation service at $3 per ton.

    Conditions: – Your orders should be in within May 10 2015.

    Minimum charge $350 for material take off.

     

    Deliverables

    • BIM Model
    • Tekla Model (version 19)
    • Fabrol or Fabsuite export
    • Highlighting problem areas
    • snap shots
    • Competitive detailing quote.

     

  • Reload reference model

    When you have to just reload only 1 reference model do not reload all. You can save time by double clicking the (more…)

  • Adding surface finish to Single part Drawings

    Normal outof the box templates do not put a Gal note on Single part drgs. However your number system may need to have to handle the situation. (more…)

  • Showing N bars on beams

    As we all know part drawing can’t show other pieces attached to it, so you can’t
    show rebar on single part drawing at all.
    (more…)

  • What is a work shop drawing

    This what wikipedia has to say about workshop drawing

    Workshop drawings are called sometimes (more…)

  • New requirements for Stairs as per AS 1657-2013

     2013 Australian Standards have changed for AS1657-2013

    Here are some of the changes most pertinent to the work we do:

    No Overlap required.

    There is no overlap required. A gap of 30 mm between treads from the trailing edge of a tread to the nosing point of the next tread is allowed.

    Changed Calculations:

    Also the calculations on whether stair complies have changed.

    1. Stair width shall not be less than 600 wide.
    2. Clear space between handrails should not be less than 550.

    See below for further details:

    Uniform Dimensions

    Section 7.2.3.2: All Risers and goings in the same flight of stairs shall be of uniform dimensions within a tolerance of 5 mm. The previous version of AS1657 was not explicit about this. I wonder how many inspectors were rejecting stairs or, giving the client a hard time because of some insignificant variation.

    Online Training Resources

    Tek1 have opened up its internal AS 1567 and AS 1428 training documentation and testing to the world. Anyone is free to enroll and learn from our online training packages, gratis. A special thank you to our Managing Director for making this possible.  You can check it out here.

    And here: http://tek1engineeringservices.com/onlinetests/course/index.php?categoryid=5

    My recommendation is to enroll as a new user rather than using the public account – that way you can track your own progress on quizzes etc without impediments.

  • Various methods for adding Points

    Add multiple points in the tekla model (more…)