Sport Pavilion is a simple project perfectly timed and done. The project was delivered on time. Few challenges faced in this project is the location of Tie beam. The beam seems be running where a full height window appears. Which affects the aesthetic view of the building. We informed the clients in prior to detailing and get the issues clarified before erection. Which made the building a wonder in reality.
Blog by Bharath – Tek1.
Visit www.tek1.com.au for further enquiries.
Sometimes in the process of converting a 2D design drawings to 3D model, we may face many issues. Like the conflict in design documents , clash in the structure and so on. Such issues can be resolved at the preliminary stage itself by the detailer and helps the client to have a complete view of the structure before construction. How to solve these issues? Just by intimating the Project manager/ Client with a simple mark-ups as below.
Blog by Bharath – Tek1.
Visit www.tek1.com.au for further enquiries.
When modeling bigger project sometimes the Reference material like IFC, CADD layout do not match with the design documents and could cause conflict. As a detailer, Verify these conflicts with the project manager and get clarified before providing with the Fabrication and Erection drawings. Such measure when done prior could save lot of money and time for the client and the Erector.
Blog by Bharath – Tek1.
Visit www.tek1.com.au for further enquiries.
While detailing we must also consider the miscellaneous items like Gutter, Mechanical units etc. Detailer may ignore such items which could impact in the cost of Erection.
We have faced and avoided one such situation such as the Gutter depth when used as specified in the design drawings conflicts with the Architectural recommended height of the structure.
Refer below snip of the queries and suggestion made to clients sometimes provide them with a snip of the model for clear explanation of things.
Blog by Bharath – Tek1.
Visit www.tek1.com.au for further enquiries.
Sloped roof and canopy makes the Benedicts Oran Park an excellent structure to detail.
We must always consider while detailing if any column or member to be placed near a open full height window or open pathway care must be taken and informed the project leads. Refer below examples snip where an column is shown in Structural plan comes near an window. But the Architect plan shows a full height window.
When such a situation arise we must inform the client regarding such issue as the column near a full height window or opening might affect the aesthetic view of the building.
Blog by Bharath – Tek1 Pvt Ltd.
Visit www.tek1.com.au for further enquiries.
Bega Tafe is a simple structure. One of the things we have to note down while constructing simple structure is some members can be more than 12 meter long. Standard transportation space available for frame is 12m x 2m x 2m. Any frame or member greater than 12m has to be reported to Project Manager in prior. We suggested to include a splice connection so that it could be transported within the limit 12m x 2m x 2m. Which saved the client thousands of dollars in transportation cost (Need Special transport facility). Sometimes due to aesthetic reasons client may bare the cost but it is always better to inform the client in prior making us a experienced firm in the field of fabrication and erection.
Blog by Bharath – Tek1 Pvt Ltd.
Visit www.tek1.com.au for further enquiries.
When an existing member is located near the new extension never forget to ask the site measurements from the Project manager. It could be of a simple mark-ups explaining things like below snip. Which could save thousands of dollars and a happy client.
Sometimes there might be a conflict between the Architectural drawings and Structural drawings. Detailer or the modeler must inform prior to the Project Manger in-order to solve the conflict and guide us with the updated decision from clients. Refer below snip of conflicts in the sliding door.
Blog by Bharath – Tek1 Pvt Ltd.
Visit www.tek1.com.au for further enquiries.
Warnambool is a city along the Great Ocean Road, in Victoria, Australia. Warnambool Footbridge is a million dollar project done quite efficiently.
The cladding work surrounding the bridge made it to be a quite nightmare to the detailers. Several Mark-ups with 3D snips or 3D cad and BIM mark-ups were sent to the client to get a clear understanding of the conflicts and to make a perfect match for the cladding. So no rework is done on the site which in-turn could save a lot of money from client side making a happy client.
Any clash in the members were informed in prior saving lot of rework and money. Which reduced the cost of the project saving thousands of dollars.
Blog by Bharath – Tek1 Pvt Ltd.
Visit www.tek1.com.au for further enquiries.
The Parramatta River is an intermediate tide-dominated, drowned valley estuary located in Sydney, New South Wales, Australia.
Tek1 has done a great job in detailing the bridge and delivering the drawings on time.
Also suggesting them with any issues that could possibly occur during erection on before hand saving thousands of dollars during detailing stage.
Try construct a new building is easier compared adding members to an existing members. We could face lot of issues on site. Tek1 has done it efficiently with skilled team members.
The existing site condition has made the Tek1 to propose lot of design changes which saved thousands of dollars during erection. Also one such thing, we provided them with a “drill template” so drilling on the members were done with ease and saved a lot of time, cost and man-hours.
Blog by Bharath – Tek1 Pvt Ltd.
Visit www.tek1.com.au for further enquiries.
