Steel Detailing | Precast Detailing | Estimation

Month: March 2017

  • Past Precast Projects

    Here are some of the projects we’ve been involved with in recent times – as of this photo (2016-2017). What’s cool about it is that they’re all in the same place at around the same time.

    Rarely will you ever see them so closely located together, let alone in the same photo. Personally I thought it was pretty cool. (Please click on the photo below to get a close-up view).

    The projects that we’ve been involved with in recent times. Either detailing or tracing.

  • Grating Splitting

    Why use us for splitting floor plates?

      1. We are experts in splitting floor plates.
      2. Super fast turn around.
      3. Full check report.
      4. Output in Tekla or Autocad.
      5. You can utilize your Tekla license for more productive work.
      6. Cost effective.

    Inputs required

    1. Company name
    2. Job number
    3. Jobname
    4. Part start no
    5. Part name
    6. Grating specification
    7. Banded
    8. Maximum allowable unsupported
    9. Span if different from info on catalog
    10. Maxim width if different from catalog
    11. Panel to panel maximum gap
    12. Maximum cantilever length along load
    13. Bar direction
    14. Surface treatment
    15. Galvanized, painted etc
    16. Maximum allowable weight per panel
    17. Delivery date
    18. Estimated sq ft/sqm
    19. Nosing strip (if any)
    20. Is cross bar to be aligned?
    21. Welding instructions?
    22. Special instructions if any

    Deliverables

    1. Full set of Grating drawings with piece marks
    2. Over all plan with piece marks,
    3. Excel Check Report with data noted and issues identified, allowing you to easily verify the integrity of the drawings, highlighting:
      • Part Marks,
      • Grating specifications
      • Piece weight, Length and width checks, as well as checks against the grating direction and the maximum unsupported length/width, plus problematic panels highlighted.

  • Bubble Deck and Panel Detailing Tooling – AutoDimension Metal Curves

    Hi folks

    Demo of the Auto-dimension metal curve tool

    Auto Dimensioning Metal Curves from Tek1 on Vimeo.

     

     

    This post is a demonstration of the powerful tooling Tek1 has at its disposal. This will save you, the client: time and incorrect dimensions.

    This tool dimensions complex metal curves in a fraction of a second.  You can’t make a mistake – that is impossible because the computer does the heavy lifting. And it can’t take more than 10 seconds (maximum). Imagine dimensioning everything by hand. That would take forever!

    It allows our engineers and draftspeople to focus on the more important things: reading and interpreting drawings, and making good design decisions.

    with kind regards

     

     

    Ben

  • Bar Bending Schedules

    We have aquired CADDs rebar cad software, which is arguably the best tool to detail rebar. CADSRC is used for producing bar bending schedules.

    WE provide the precise details on bends, shapes and lap splices to meet the requirement of your specific project.  Project Constructrability is tackled while detailing, issues are highlighted. Detailed drawings are provided for the rebars. The detailed drawings provided by our rebar detailers often help our contractors to visualize the structures.  In fact, with these detailed drawings, the task of iron workers are highly simplified, as they know where to place and thus reduces the cost of installation.

    • Foundation details
    • Bar Bending Schedules
    • Bar listing
    • Total rebar estimation
    • Footing Detailing
    • I/S beams and Columns
    • Bar Bending Schedules

    Our detailers have a long track record of iconic projects working with top-tier fabricators, general contractors, engineers, owners and EPCM firms, where:Rebar

    • Our  global workforce enables us to acommodate large projects and schedulecritical surges.
    • We take pride in our reputation for quality, error free and timely delivery on complex projects.
    • We have captive detailing capacity. If we are fully booked out, we will tell so.
    • Our detailing office not a sweat shop. Detailers have high morale and take pride in the work do.
    • Our man power turnoverRebar-2 is the lowest in the Industry

    Our services include rebar detailing and estimating,

    Bar lists and shop drawings can be emailed or delivered via our internal application to manage construction projects. Items can be queried by your field personnel from they tablets, or phones.

    QR Coded drg Nos makes it easy to access information about items and status.

    Deliverables

    • Field Placement/Shop Drawings
    • 2D and 3D Modelling of Rebar
    • Connection Sketches
    • Bar Listing in ASA Format
    • Instant Access to Projects via our Interal project management tool
    • Weight and/or Cost Change Tracking and Submitting via our custom tool
    • RFI Generation for Questions and tracking with our custom tool
    • DGN Files Available to Customer
  • HVAC DETAILING

    HVAC DETAILING

    We provide all phases of Mechanical, and Plumbing (MEP) and HVAC detaiing, drafting and modeling services. Our gathered expertise in all kinds MEP systems is streamlined to cater to Industrial, Residential, Hospital, Educational and Commercial sectors.

    Our MEP services include Wire frame 3d models when required, Shop and fabrication drawings, Isometric drawings, as built drawings, mark-up detailing,

    We provide MEP shop drawing which include Plumbing shop drawings, Duct shop drawing, Piping shop drawings,  MEP coordination drawings, etc.

    As built drawings are very important for the contractor to collect payments. We provide excellent and very competitive prices for as built drawings

    Co-ordination is the key to a successful MEP project.

    We co-ordinate with Navisworks, Tekla BIM Sight. Sketch up

    Excellent document management systems make sure that the project is fully tracable

    contact Us on koshy@tek1.com.au