Author: admin
-
-
Design of Sheds
Relevant Australian Standards
AS/NZS 1170.0 General Principles
AS/NSZ 1170.1 Permanent and Imposed Actions
AS/NSZ 1170.2 Wind Actions
AS NSZ 1170.4 Earth Quake Actions
Member Design Standards
AS/NZS 4600 Cold Formed Steel Structures
AS 4100 : Steel Structures
AS/NZS 5131 Fabrication and Erection of Structural Steelwork
The Foundation Standards
AS 2870 Residential Slabs and FootingsAS 3600 Concrete Structures
AS 2159 Piling Design and Installation
Material Specifics
AS/NSZ 3679.1 Hot Rolled bars and sections
AS/NZS 1163 Cold formed structural steel hollow sections.
AS/NSZ 1397 Steel sheet and strip
-
Minimum Pocket Depth for Coloumns
What is the minimum pocket depth required for rebated coloumns
The minimum washer size is 3 mm. This could be different. If nothing is mentioned use 3 mm.
The minimum bolt stick out should be 1 pitch. For M20 it is 2.5 mm. Use 10 mm stick out.
Also there is grout. Pockets when cast could be of different depths. Use design grout of 15 mm minimum.
The top of the bolt should be 35 mm below slab level to prevent concrete Cracking.
Hence to be practical use 100 mm pocket depth with a base plate thickness of 16 mm and bolt size of 20 mm.
-
Foot Bridges | WalkWays | Pedestrian over passes
-
Foot Bridges | WalkWays | Pedestrian over passes
-
Warrnambool Foot Bridge
-
-
Warrnambool Foot Bridge
Pedestrian overpass Foot Bridge steel drafting
Expert Steel Draftsman | Foot bridge | Pedestrian over pass | Walk Ways
Street Address Warnambool State Victoria Country Australia Modeler Ganesh | Ramakrishnan -
Mount Alvernia College
Expert Take Off Service from Tek1 Mount Alvernia College
Expert MTO. Fast. Low Cost call us on.
Expert Material Takeoff and Steel Estimation Services
Competitve pricing
Tel: 0425791837
-
Navigate a million Changes?
Meticulous Care – Expertise alone not sufficent
Meticulous Care – Expertise alone not sufficent With many many changes, Mulitple site meaures, point cloud data, unless the processes are good and the care is meticulous, the knowledge and expertise will not count Street Address ATL Station State NSW Country Australia Modeler Ganesh Kumar
With many many changes, Mulitple site meaures, point cloud data, unless the processes are good and the care is meticulous, the knowledge and expertise will not count
Street Address ATL Station State NSW Country Australia Modeler Ganesh Kumar -
.Net | Python Ruby on Rails
-
Tekla Open API Resources
Firstly, Tek1’s Open API Blog posts here. The Open API Reference. This was produced by Trimble and is the go-to place for information about classes and methods etc. There are some code examples also given. You can download it all from here. There are some basic code examples in there which is well worth investigating.…
-
Bubble Deck and Panel Detailing Tooling – AutoDimension Metal Curves
Hi folks Demo of the Auto-dimension metal curve tool Auto Dimensioning Metal Curves from Tek1 on Vimeo. This post is a demonstration of the powerful tooling Tek1 has at its disposal. This will save you, the client: time and incorrect dimensions. This tool dimensions complex metal curves in a fraction of a second.…
-
How to obtain a small offset around a polyline? (AutoCAD .net API)
Offsets from a panel are used extensively in detailing. Here’s how to do it – simple, no? See below: DBObjectCollection _offsetPolylines = polylineInstance.GetOffsetCurves(25); // offsets the polyline by 25 mm // the object collection should really have only one item in it: a polyline offseting the original by 25mm.
-
How to return a selection of Objects to the user (AutoCAD .net)
Here’s the code: And that should select any objects that you want to select. You’ll have to put it in an array though. A handy hint which can save you a bit of grief.
-
The importance of identifying the assumptions Behind Every Problem
My estimable colleague Rafik Ben made a blog post concerning a problem. For reference, here it is: http://routetomastery.com/blog/2017/01/08/has-pair-with-some-problem/ So what’s so good about Rafi’s problem? Well like most things in the world, the problem, is not the actual problem. When it comes to computer science, the *actual* problem lies in identifying or understanding it. And…
-
