Mark Exposed Edges on Precast Panel shop Drawings
Finishing of Exposed edges
The precast mould is dismantled while the concrete can still can be worked to some extent
(more…)
The precast mould is dismantled while the concrete can still can be worked to some extent
(more…)
The precast mould is dismantled while the concrete can still can be worked to some extent
(more…)The precast mould is dismantled while the concrete can still can be worked to some extent
(more…)AS/NZS 1170.0 General Principles
AS/NSZ 1170.1 Permanent and Imposed Actions
AS/NSZ 1170.2 Wind Actions
AS NSZ 1170.4 Earth Quake Actions
AS/NZS 4600 Cold Formed Steel Structures
AS 4100 : Steel Structures
AS/NZS 5131 Fabrication and Erection of Structural Steelwork
AS 3600 Concrete Structures
AS 2159 Piling Design and Installation
AS/NSZ 3679.1 Hot Rolled bars and sections
AS/NZS 1163 Cold formed structural steel hollow sections.
AS/NSZ 1397 Steel sheet and strip
The minimum washer size is 3 mm. This could be different. If nothing is mentioned use 3 mm.
The minimum bolt stick out should be 1 pitch. For M20 it is 2.5 mm. Use 10 mm stick out.
Also there is grout. Pockets when cast could be of different depths. Use design grout of 15 mm minimum.
The top of the bolt should be 35 mm below slab level to prevent concrete Cracking.
Hence to be practical use 100 mm pocket depth with a base plate thickness of 16 mm and bolt size of 20 mm.
| Street Address | Warnambool |
| State | Victoria |
| Country | Australia |
| Modeler | Ganesh | Ramakrishnan |
Expert MTO. Fast. Low Cost call us on.
Expert Material Takeoff and Steel Estimation Services
Competitve pricing
Tel: 0425791837
Meticulous Care – Expertise alone not sufficent With many many changes, Mulitple site meaures, point cloud data, unless the processes are good and the care is meticulous, the knowledge and expertise will not count Street Address ATL Station State NSW Country Australia Modeler Ganesh Kumar
With many many changes, Mulitple site meaures, point cloud data, unless the processes are good and the care is meticulous, the knowledge and expertise will not count
| Street Address | ATL Station |
| State | NSW |
| Country | Australia |
| Modeler | Ganesh Kumar |
