| database | mysql (10.11.8-MariaDB-0ubuntu0.24.04.1) | must be installed and enabledWrong $CFG->dbtype. You need to change it in your config.php file from ‘mysqli’ to ‘mariadb’ |
| site not https | if this test fails, it indicates a potential problemIt has been detected that your site is not secured using HTTPS. It is strongly recommended to migrate your site to HTTPS for increased security and improved integration with other systems. |
Steps Edit Bolt Catalogue. Add the Ferrule bolt in this case we are going start from BOLTFB1640 and create BOLTFB1655 Then we add a bolt Assembly catalog. Again we start from Bolt BOLTFB1640 and create BOLTFB1655 Then we use that in tekla to model the bolt. When you model the bolt make sure 1. No nut is used 2. Washer is on the head side. 3. Cut length is negative of the length you want. This decides the length of the bolt in report. Most important do not ignore — Take report and check.
Upload the reference models when you upload the model to trimble connect.
Now any one can make some quick checks.
You can turn off/on the reference models for quick checks.
May adjust the transparency too
#Trimble Connect #Tekla
hess Engineering.
Detailed expertly by Tek1 with the following scope
Tek1’s A team was proud to be involved.
We have completed this project with NIL errors for detailing side. It went extremely well with Chess too.
Chess too hadextremely low stuff ups (as reported) You can see the trimble connect model of the entire proejct at our blog post
We were requested to develop a culvert mould for the precast manufacturere.
We have studied the requirements came up with a design. Submitted inital model with markups.
Very few changes were done and the final design completed and shop drawings delivered.
If you have any need for developing some tooling fixtures or anything which requires design, then Tek1 is the GOTO place.
At Tek1, we specialize in transforming complex architectural visions into constructible shop drawings. This model snapshot showcases a recent precast project where aesthetic texture meets structural integrity.
Technical Highlights:
You may email us when the app is getting ready for instant shop drawings at info@tek1.com.au
As Steel detailers, we have frequent need to access recently access files over and over.
This is how you do it
Use the “Recent Items” Hidden Folder
Press Win + R, type shell:recent, and hit Enter.
This opens the folder containing everything you’ve recently touched.
Click the Pin to Quick Access button in the ribbon.
Now, one click in your sidebar gives you a chronological list far exceeding 15 items.
#Recent #Productivity #SteelDetailing
