Steel Detailing | Precast Detailing | Estimation

Author: admin

  • Staff Memos

    Staff Memos

    • Memo 11 – Avoid using AWS VPN Client while in the Office

      When accessing our Tekla servers, we have traditionally been using the AWS VPN client to access our licenses. All of this results in high costs for the firm, just to access our licenses. But now we can access our licenses, from the office, without doing anything. You don’t need to log into Azure, or use…

      Read more: Memo 11 – Avoid using AWS VPN Client while in the Office

    • Memo #9 – Justify Variation Hours to Clients

      If you have 20 hours worth of variations: do you think your client will rejoice? Typically, no! Clients demand transparency! They have every right to know: (i) why you are charging them, and (ii) what they will get in return. It will not do to simply say: variation: 20 hours. Why not? Clients will assume…

      Read more: Memo #9 – Justify Variation Hours to Clients

    • Memo #8 – Don’t use private emails/channels etc for firm correspondence

      This will probably apply wherever you work: don’t send project and firm related correspondence on your private whatsapp chats, or on your private emails etc. Why not? It’s very hard to track. We have no record. Nothing can be verified. Protect yourself, your careers, your firm, and your clients: it’s pretty simple: avoid using private…

      Read more: Memo #8 – Don’t use private emails/channels etc for firm correspondence

    • Memo #7 – How to on Statuses, ETAs must be accurate

      When traveling overseas, especially India, I often hear the following: “Where are you? “I’m almost there” “When will you arrive?” “Five minutes!” They always say: “five minutes”. Once, I remember waiting, for at least 45 minutes. Not sure if this is a cultural thing. I’ve heard Indians say: “Oh, that’s IST – Indian Standard Timing”.…

      Read more: Memo #7 – How to on Statuses, ETAs must be accurate
  • Fast Track to a Tekla Career

    Fast Track to a Tekla Career

    Ready to trade that graduation cap for a career in 3D modeling?

    🎓🏗️ If you’re looking to break into the world of structural steel as a Tekla Detailer, we’ve got the ultimate “cheat code” to get you hired

    Here is your step-by-step roadmap to joining the Tek1 team:

    Get the Keys 🔑

    (more…)

    Ready to trade that graduation cap for a career in 3D modeling?

    🎓🏗️ If you’re looking to break into the world of structural steel as a Tekla Detailer, we’ve got the ultimate “cheat code” to get you hired

    Here is your step-by-step roadmap to joining the Tek1 team:

    Get the Keys 🔑

    (more…)

    Ready to trade that graduation cap for a career in 3D modeling?

    🎓🏗️ If you’re looking to break into the world of structural steel as a Tekla Detailer, we’ve got the ultimate “cheat code” to get you hired

    Here is your step-by-step roadmap to joining the Tek1 team:

    Get the Keys 🔑

    (more…)
  • Large Material Take Off

    Large Material Take Off

    McKillops Take Off

    A 240 ton Material take completed in a very short time, accurately modelled.

    Estimation Accuracy and Speed

    With tested a tried processes, Tek1 offers fast turn around and accurate take offs. Your Estimation time is cut by weeks.

  • Installing Moodle on Lightsail

    databasemysql (10.11.8-MariaDB-0ubuntu0.24.04.1)must be installed and enabledWrong $CFG->dbtype. You need to change it in your config.php file from ‘mysqli’ to ‘mariadb’
    site not httpsif this test fails, it indicates a potential problemIt has been detected that your site is not secured using HTTPS. It is strongly recommended to migrate your site to HTTPS for increased security and improved integration with other systems.

  • Adding Ferrule Bolt

    How to create a Ferrule Bolt and Use it.

    Steps Edit Bolt Catalogue. Add the Ferrule bolt in this case we are going start from BOLTFB1640 and create BOLTFB1655 Then we add a bolt Assembly catalog. Again we start from Bolt BOLTFB1640 and create BOLTFB1655 Then we use that in tekla to model the bolt. When you model the bolt make sure 1. No nut is used 2. Washer is on the head side. 3. Cut length is negative of the length you want. This decides the length of the bolt in report. Most important do not ignore — Take report and check.

  • Dont Run Upstairs for missing dimension

    Dont Run Upstairs for missing dimension

    Download the QR CODE PDF HERE

  • Use Trimble Connect for Quick Checking

    Trimble Connect for Checking

    Upload the reference models when you upload the model to trimble connect.

    Now any one can make some quick checks.

    You can turn off/on the reference models for quick checks.

    May adjust the transparency too

    #Trimble Connect #Tekla

  • Emu in the sky goes live

    https://youtu.be/iJackq8YAEI

    Iconic project by Chess Engineering

    hess Engineering.

    Detailed expertly by Tek1 with the following scope

    1. The Structure
    2. The Architecturals – Extremely Complex.
    3. The lighting fixtures

    Tek1’s A team was proud to be involved.

    We have completed this project with NIL errors for detailing side. It went extremely well with Chess too.

    Chess too hadextremely low stuff ups (as reported) You can see the trimble connect model of the entire proejct at our blog post

    View the trimble connect model

  • Culvert Mould

    We were requested to develop a culvert mould for the precast manufacturere.

    Problems to Solve

    Culvert Mould
    • Reusable
    • Easy to de mould
    • No injury to personnel
    • Cheap.
    • Accuracy of final product.

    We have studied the requirements came up with a design. Submitted inital model with markups.

    Very few changes were done and the final design completed and shop drawings delivered.

    If you have any need for developing some tooling fixtures or anything which requires design, then Tek1 is the GOTO place.