Katherine Precinct Community Hall was a design and construct project undertaken by Tek1 Pty Ltd. Our skilled detailers have delivered the project on time and we did not get one phone call from workshop or site after we recieved IFC(Issued for Construction) drawings. Our IFA drawing had zero markups. Katherine precinct is a typical example of structural drafting done by Tek1 Pty Ltd
If you are looking for a detailer with a lot of experience in detailing Balustrades, Picket Railing, Curtain Walls, Railings and Facades, then you have come to the right place.
We are fully conversant with Australian balustrades (glass balustrade and picket balustrades type) , the type of fittings to be used, the types of glasses normally used. Also we take care of the Australian standards AS1428, and AS1657. So even if the Architect has missed something, rest assured that we will find and rectify problems if there are any. Full checking to both the above standards are carried out on all our jobs.
We are familiar with a range of fittings; however if you do not have a preference we would recommend Axiom products for the design we undertake.
We have done enough metal works jobs to save you from unnecessary time spent on emails in between approvals. Most of our shop drawing proposals go through the first time.
Site measure drawings are clearly marked out as to what items need to be site measured. We will provide you with Youtube videos of your job on request so that appearances can be viewed on iPhone and tablets. You will shorten your lead-time and cut your project cost when we are on the job.
Kolbe College was detailed by Tek1 Pty Ltd. This is an example of the type of school structures we can detail for you. The shop drawings have gone through first time and we have not received one phone call on this job from either factory or site.
This is another typical example of our no phone call shop detailing.
Builder 2 Construct.
Tek1 has the skills and the ability to handle your complex and tight projects. Our detailers are skilled and will give you no problem shop drawings. Questions from shop or site are non-existent or very minimal. For best quality detailing at very competitive pricing, contact us.
The Tek1 team has specialists in Industrial detailing for Mining and Industrial structures. We have undertaken detailing of the Francis Creek iron ore project and have also worked on countless commercial and industrial jobs. Our 3D modelling capabilities are second to none and when combined with our extensive experience in steel design and detailing, ensure we consistently deliver accurate, high quality products. With experience expertise and knowledge of conveyor design, design of head chutes and take up units, you will not go wrong when you engage us.
All of our projects are drawn using the latest 3D modelling software (Tekla), which is ideal for complex structures and designs or detailed drawing production. Using the latest software also enables custom tailoring of any required reporting, cutting part lists, assembly part lists, cutting profiles (NC & DXF) or materials billing, as required by the project. If you are using the latest project management software like Fabrol or Fabsuite, we can handle that.
Tek1′s drafting service can take your ideas from concept to completion. We offer complete detailing services for mechanical components used in the materials handling and mining industries. We specialise in special purpose mechanical items, including trolleys, shuttles, pressure vessels, head chutes, transfer stations and conveyors.
The following video gives a snap shot of what we can do for you. In this example the items detailed are:
Please watch our video presentation on mining detailing
Bunnings Warehouse was a design and build project for us. We have been given original structural drawings to make it suitable for manufacture overseas in China. These instructions along with very short delivery times added significant challenges in shop drawings. One of the requirements by the clients was that that we have to issue plate blanks for the rafters as early as possible. As early as possible meant that we could not wait to put all the holes in the plate blanks before releasing them. We also had to keep the numbering system intact. These conditions introduced quite a few numbering challenges. Our technicians came up with a solution which not only enabled us to release blank drawings for rafters in the second week, but also kept the total number of drawings not significantly higher than had it been detailed the normal way. When you engage us for your detailing work, you can rest assured that the best detailers are on the job. All work is compliant with Australian steel detailing requirements. When it comes to high quality warehouse structural steel shop drawings, you can count on Tek1 to deliver.
