Steel Detailing | Precast Detailing | Estimation

Category: blogs

Blogs By Tek1 on Steel detailing, Precast Panel Detailing, Stairs, Projects,

  • .Net | Python Ruby on Rails

    • Dont Lose time with missing dimensions

      Do you loose time with missing dimensions Have you ever used the wrong revision? Here is what is cooking at Tek1. If you would lik to to know more Here is a solution where you can scan the QR code and bring up the assembly model. know the revision number of the drawing which you…

    • Precast Panels with Tekla Structures

      This is probably first precast project we have attempted with tekla structures as the tool. We have done a few with Revit, and lot with Autocad. There is raging argument with no one really know (unless one has walked in the weeds) which is a better tool I believe no tool as out of the…

    • Why aren’t the user defined attributes being defined – in Tekla’s “Open” API

      If you want to waste time on a poorly documented API (which doesn’t make any sense) I would highly recommend getting on Tekla. I’m documenting this so some poor soul doesn’t waste a day trying to debug this: Do you see the problem? First insert the beam, and then apply the UDA and it should…

    • How to check if you have a legitimate Tekla Profile using the Tekla Open API

      Our use case? How can we check? Voila! Now it’s hard to make a mistake. If you want to get all materials – it’s very similar to the above. Use the CatalogHandler.GetMaterialItems() method along with the materialItem.MaterialName property. The code to actually do that – I will leave as an exercise to the reader.

    • How to Get Tekla Model Objects if selected by Users (Tekla API)

      A user has pre-selected a set of model objects. We need to retrieve them via the API. How do we do it? All of our code is extracted from our production apps.

  • Steel Stairs | Melbourne | Sydney | WA

    Steel Stairs | Melbourne | Sydney | WA

  • SHED | DARETON NSW

    SHED | DARETON NSW

    Trimble Connect Model
    Darenton-NSW
    Darenton-NSW

    Project Location: Daren Town

    State: NSW

  • Steel Detaling | LA

    Steel Detaling | LA

    Shop drawings to Steel Detailing | AISC | ASTM

    The Grand LA

    Los Angles

    Our Services

    Expert Steel Detailing Services

    Our Services for the City

    The Standards we Follow
    Our ServicesSteel Detailing
    Shop drawings to Steel Detailing | AISC | ASTM
    Steel Estimation
    We build a tekla model from Structural drawings in Tekla
    Produce the reports, give you the model and the reports with expert comments.
    Standards we followSteel detailing AISC 360 (Specification for Structural Steel Buildings): The foundational standard for the design, fabrication, and erection of structural steel.
    ASTM Specifications: All materials must be identified and traceable to specific ASTM standards (e.g., A992 for wide flanges, A36 for plates).
    OSHA StandardsWe follow OSHA Standards -1926.754, 1926.755, 1926.756

    Interesting Steel Structures in Los Angeles

    Ribbon Of Light
    Ribbon of LIght

    Ribbon of Light

    650 S Clarence St, Los Angeles, CA 90033

  • Staff Memos

    Staff Memos

    • Adding details without approval which affects other trades

      This memo clarifies the process for handling drawing approvals and issuance to ensure project coordination and minimize potential errors. Drawing Approval Reviews: When receiving approved drawings, carefully review them for any markups that may significantly impact other trades or existing structural elements (e.g., slabs, foundations, anchor bolts). Example: If an approved drawing introduces a slab…

      Read more: Adding details without approval which affects other trades

    • Memo 43 – The Process of Invoicing – Check if Invoices have been raised

      What is the problem What is the process? Things may vary, depending on the job, but that’s it in a nuthsell. Check Payment terms before: Alert someone if you see that invoices have not been raised: But the Managing Director said: “we have been paid” therefore I sent the drawings: How do I check? Check…

      Read more: Memo 43 – The Process of Invoicing – Check if Invoices have been raised

    • Memo 43 – Cut the Crap from your marketing materials

      I see this type of thing all too often from Tek1 staff – from both our offices: At Tek1, we believe in pushing the boundaries of conventional design to provide our clients with superior results. This project exemplifies our dedication to innovation and quality in every detail Cut it out. It’s nothing but BS /…

      Read more: Memo 43 – Cut the Crap from your marketing materials

    • Concrete and Steel – Hidden Snags to Watch out For –A Case Study in Duffy’s Forrest – An Example of Something that can Kill your client

      “In the world of steel detailing, failing to account for concrete variances can cost your client dearly. This case study from Duffy’s Forest serves as a vital reminder of why site surveys in steel detailing are non-negotiable. Without accurate site measurements, you risk massive on-site rectification costs—including crane hire and specialized labor crews—that can easily…

      Read more: Concrete and Steel – Hidden Snags to Watch out For –A Case Study in Duffy’s Forrest – An Example of Something that can Kill your client