Job Dan Murphy Pakenham.
Client Call. Stating that Trusses since there are covered should not be galvanized
This was a grey area for us. But going forward, Unless explicitly called for do not galvanise steel unless exposed to the atmosphere without a cover. Trusses are within some sort of cladding. Hence do not galvanize
On A3 should be readable. If not readable add split drawings to more than one sheet. Name drawing E-ISO-1, E-ISO-3 etc so that everyone can easy know it is isometric.
Add part marks.
Do not show purlins
Today me, client and fabricator spent a lot of time on on quote No https://tek1-quotes.herokuapp.com/quotes/3687 trying to identify drawing nos on the Iso metric drawing.
It is important that grid lines are there in IFC Model. Without grid lines it is hard to locate members on IFC model from drawing. Today I am searching for https://tek1-quotes.herokuapp.com/quotes/3909 col shown on drg E-23 Section JJ. I download the IFC Model. But no grid lines. The IFC model does not look like the floor plan too. Spending too much time
Tek1 has successfully completed the commercial project for the reputed organisation in Australia.
The scope of work involves providing privacy screens and their supports. We have encountered challenges with the aluminum screen bends during the project.
Initially, we received instructions that each screen should have a bend in all four directions, which we modeled and sent for approval.
However, the client later requested that we split the top and bottom of the screen and provide separate pieces to be welded to the main screen.
Our client expressed satisfaction with our work.
