McKillops Take Off
A 240 ton Material take completed in a very short time, accurately modelled.
Estimation Accuracy and Speed
With tested a tried processes, Tek1 offers fast turn around and accurate take offs. Your Estimation time is cut by weeks.
Author: admin
-
Installing Moodle on Lightsail
database mysql (10.11.8-MariaDB-0ubuntu0.24.04.1) must be installed and enabledWrong $CFG->dbtype. You need to change it in your config.php file from ‘mysqli’ to ‘mariadb’ site not https if this test fails, it indicates a potential problemIt has been detected that your site is not secured using HTTPS. It is strongly recommended to migrate your site to HTTPS for increased security and improved integration with other systems. -
Adding Ferrule Bolt
How to create a Ferrule Bolt and Use it.
Steps Edit Bolt Catalogue. Add the Ferrule bolt in this case we are going start from BOLTFB1640 and create BOLTFB1655 Then we add a bolt Assembly catalog. Again we start from Bolt BOLTFB1640 and create BOLTFB1655 Then we use that in tekla to model the bolt. When you model the bolt make sure 1. No nut is used 2. Washer is on the head side. 3. Cut length is negative of the length you want. This decides the length of the bolt in report. Most important do not ignore — Take report and check.
-
Use Trimble Connect for Quick Checking
Trimble Connect for Checking
Upload the reference models when you upload the model to trimble connect.
Now any one can make some quick checks.
You can turn off/on the reference models for quick checks.
May adjust the transparency too
#Trimble Connect #Tekla
-
Emu in the sky goes live
Iconic project by Chess Engineering
hess Engineering.
Detailed expertly by Tek1 with the following scope
- The Structure
- The Architecturals – Extremely Complex.
- The lighting fixtures
Tek1’s A team was proud to be involved.
We have completed this project with NIL errors for detailing side. It went extremely well with Chess too.
Chess too hadextremely low stuff ups (as reported) You can see the trimble connect model of the entire proejct at our blog post
-
Culvert Mould
We were requested to develop a culvert mould for the precast manufacturere.
Problems to Solve
- Reusable
- Easy to de mould
- No injury to personnel
- Cheap.
- Accuracy of final product.
We have studied the requirements came up with a design. Submitted inital model with markups.
Very few changes were done and the final design completed and shop drawings delivered.
If you have any need for developing some tooling fixtures or anything which requires design, then Tek1 is the GOTO place.
-
Precast Blade Panels
Project Overview: Reckli Pattern Integration
At Tek1, we specialize in transforming complex architectural visions into constructible shop drawings. This model snapshot showcases a recent precast project where aesthetic texture meets structural integrity.
Technical Highlights:
- Software: Modeled 100% in Tekla Structures for BIM-ready accuracy.
- Surface Treatment: Seamless integration of Reckli formliner patterns, ensuring the architectural finish aligns perfectly across panel joints.
- Detailing Depth: Full reinforcement modeling (rebar and mesh), including lifting anchors, grout tubes, and connection hardware.
- Manufacturer Ready: Our shop drawings are designed to minimize onsite clashes and streamline the casting process at the precast yard.
-
Instant Shop Drawing
You may email us when the app is getting ready for instant shop drawings at info@tek1.com.au
