This page show cases some of the Steel Detailing projectgs completed in Melbourne, Sydney, WA, Brisbane Tek1 has completed
Project description
| The Standards we Follow | AS4100 AS 1428 AS1657 |
| Our Services | Steel Detailing, Precast Panel Detailing |
Fabricator – Third Angle
TEK1 Successfully done this New port bike park by one time detailing without any hitch.
TEK1 completed a showroom extension project for a prominent organization in Australia. The goal was to provide drawings for the showroom extension. This project involves a lot of site measures because we are taking support from the existing steel.
TEK1 completed a stair project for a prominent organization in Australia. The goal was to provide drawings for the stair and cladding. Apart from that, the client also wants us to detail handrails for the stairs.
We are proud to be a part of the team in Mildura Christian College project.
Our detailing team worked closely with architects to ensure tolerances and offsets were met without compromising design intent With a limited fabrication and erection window, our detailing team adopted a fast-track workflow using Tekla Structures for 3D modeling.
This allowed us to provide early shop drawings for procurement and parallel review of sections still under coordination.
TEK1 completed a cladding project for a prominent organization in Australia. The goal was to provide claddings to buildings for aesthetic purposes. Apart from that, the client also wants us to detail handrails & glass balustrades for the stairs.
The minimum washer size is 3 mm. This could be different. If nothing is mentioned use 3 mm.
The minimum bolt stick out should be 1 pitch. For M20 it is 2.5 mm. Use 10 mm stick out.
Also there is grout. Pockets when cast could be of different depths. Use design grout of 15 mm minimum.
The top of the bolt should be 35 mm below slab level to prevent concrete Cracking.
Hence to be practical use 100 mm pocket depth with a base plate thickness of 16 mm and bolt size of 20 mm.
TEK1 completed a canopy project for a prominent organization in Australia. The goal was to provide detailed support for steelwork canopies.
Meticulous Care – Expertise alone not sufficent With many many changes, Mulitple site meaures, point cloud data, unless the processes are good and the care is meticulous, the knowledge and expertise will not count Street Address ATL Station State NSW Country Australia Modeler Ganesh Kumar
With many many changes, Mulitple site meaures, point cloud data, unless the processes are good and the care is meticulous, the knowledge and expertise will not count
| Street Address | ATL Station |
| State | NSW |
| Country | Australia |
| Modeler | Ganesh Kumar |
