Steel Detailing | Precast Detailing | Estimation

Category: Steel Detailing Blog

This page show cases some of the Steel Detailing projectgs completed in Melbourne, Sydney, WA, Brisbane Tek1 has completed

  • ALDI MERIMBULA, 103 MAIN STREET, NSW 2548

    ALDI MERIMBULA, 103 MAIN STREET, NSW 2548

    Author: Raj (Arokiaraj Arputharaj)

    ALDI MERIMBULA features a versatile multipurpose hall structure, and TEK1, a dedicated steel detailer, played a pivotal role in its realization. Specializing in All Steels, TEK1 meticulously executed the installation of anchor bolt steel columns, beams, braces, and purlins.

    As a steel detailer, TEK1 raised multiple Requests for Information (RFIs) along with corresponding proposals. These RFIs contributed to refining the project details, showcasing TEK1’s commitment to precision in steel detailing.

    The client’s prompt response to TEK1’s RFIs facilitated effective communication and adjustments. It’s important to note that while TEK1 did not design the structure, their expertise in steel detailing significantly influenced the project’s success.

    The collaborative efforts of our team, with TEK1 at the forefront of steel detailing, ensured the swift and successful completion of the project.

     

     

     

     

     

     

     

     

     

     

     

    .

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    (more…)

  • Hurstville Golf Club

    Hurstville Golf Club

    The Hurstville Golf Club, located at 57 Lorraine Street in Mortdale, comprises three buildings: a Cart Store, Proshop, and Club House. The Cart Store and Proshop are single-story structures, while the Club House is a two-story building.

    Design details at the junctions of these three buildings were incomplete, and TEK1 proposed member locations and connection details. These proposals were reviewed and accepted by the consultants.

    Completed Building

     

    Tekla Model

     

    Tekla Steel Model

  • Navigating Kick Plate Dimensions:Unveiling the Distinctions Between AS1428 and AS1657 Standards

    Navigating Kick Plate Dimensions:Unveiling the Distinctions Between AS1428 and AS1657 Standards

    In the realm of architectural and structural standards, the dimensions of kick plates play a crucial role in ensuring safety and accessibility.

    When it comes to ramps, AS1428 sets a minimum height requirement of 150mm for the top of the kerb rail from the floor. This standard aims to provide optimal support and guidance for individuals with diverse mobility needs.

    However, the story takes a nuanced turn when we shift our focus to stairs. AS1657, the standard specifically addressing fixed platforms, walkways, stairways, and ladders – dictates a different criterion.Here, the top of the kick plate is mandated to be at least 100mm above the floor.

    Navigating these standards requires a keen understanding of the specific contexts in which they apply, showcasing the meticulous nature of design considerations in the pursuit of both safety and inclusivity.

  • Anzac Parade Pedestrian Bridge

    Anzac Parade Pedestrian Bridge

  • Tekla – Error in STP file export

    Tekla – Error in STP file export

    As a TEKLA user, this blog will help you prevent mistakes in the fabrication shop. It can also save a lot of costs for you if you read it fully.

    Some clients request STP files for fabrication purposes, but it’s important to note that there may be errors in the Tekla export. Generally, Tekla lacks a built-in option for the STP format. We use an extension called multi converter, obtained from the Tekla warehouse, for STP exports.

    But, unfortunately, some parts don’t export properly, and we’ve encountered issues in our project.

    Please see the below nc file snap for part no m513.

    But when we export the same part in multi converter for STP format , We have got some errors.Please see below snap.The exported STP file shows only a small part instead of the entire component.

    Most of the parts export successfully without any errors. However, a few parts with a maximum number of cuts are encountering issues, as shown in the snapshot. Therefore, I recommend checking the exported STP format files before sending, particularly for parts with a higher number of cuts in the model.

    We have contacted TEKLA support regarding this issue. Please wait for a while, and we will update you once we receive a response from them.

  • 14 Anderson Street, South Yarra, Victoria

    14 Anderson Street, South Yarra, Victoria

     

     

     

     

     

     

     

  • 19-21 Caladenia Court

    19-21 Caladenia Court

    Caladenia Court in Australia.

     

    Tek1 has successfully completed a commercial project for a Caladenia Court in Australia.

    The scope of work involves providing the Stair & the Awning steels. we completed this job in a day without any hitch.

  • Residential development – Hall road

    Residential development – Hall road

     

    Tek1 has successfully completed a commercial project for a reputable organization in Australia.

    The scope of work involves providing support for the cladding walls and awning roof. Due to frequent changes in the structural design, we have coordinated directly with the structural designer to update our model accordingly. This approach minimizes variation costs for both the client and the designer.

    We held numerous meetings with the client to ensure there would be no mistakes during the installation process. As expected, the installation was carried out without any issues.

    The client is highly satisfied with our work.

  • Eastbourne

    Eastbourne

    This is a Eastbourne. TEK1 Successfully done this job by one time detailing without any hitch.

    Some of the Model Snaps

    Overall model view

     

    Overall Steel model view

    Overall layout (Plan)

    Elevation

    Detailed by Vignesh & Santhakumar